|
|
Ceramic dental restoration milling from stock based on ZrO2
Ščasnovič, Erik ; Spusta, Tomáš (referee) ; Kaštyl, Jaroslav (advisor)
In this bachelor thesis, the theoretical overview about the milling of the dental zirconia blanks was performed. The tests of biaxial flexural strength were evaluated in the experimental part, as well as the roughness and the grain size in sintered state and the linear shrinkage was determined. These tests were done for gel cast blanks from zirconia dioxide prepared in laboratories and also for two types of commercially available zirconia oxide blanks fabricated by cold isostatic pressing. The relationship between strength and grain size was shown. The samples prepared from gel cast blanks had statistically significantly higher strength than samples from commercial blanks. At the end of the thesis, the milling of dental crown was carried out based on real tooth model from gel cast zirconia blank studied in this thesis.
|
|
|
Design of a simulator module for analysis of friction and wear of teeth during cleaning
Snopek, Lukáš ; Streďanská, Alexandra (referee) ; Vrbka, Martin (advisor)
This thesis focuses on the design of a module for the tribological simulator Bruker UMT TriboLab, which will be used in research in the field of analysis of wear of hard dental tissues and filling materials due to tooth cleaning. The aim of this work was the design of experimental conditions, module construction, creation of drawing documentation, production and subsequent implementation of a validation experiment. The conditions of the experiment were determined on the basis of research and to create an optimal design solution, prototypes were continuously produced using the 3D printing method. Finally, two toothbrush fixtures and two dental filling sample fixtures were made based on the drawing documentation. Subsequent assembly of the fixtures and the implementation of the experiment on the tribometer verified their functionality, which makes it possible to declare all the goals successfully met. Now these fixtures will be part of several research tasks in the field of oral biotribology.
|
|
|
Tooth Detection on Jaw 3D Computer Polygonal Model
Hulík, Rostislav ; Španěl, Michal (referee) ; Kršek, Přemysl (advisor)
This document discusses a concept and implementation of algorithms for teeth detection on 3D polygonal jaw model. At first, I describe possible shape detection techniques on three dimensional computer model, including utilization just in my case. After it, I analyze filtration problems of obtained model segments in order to reliably separate regions of tooth-arch from the rest of jaw. I included all these pieces of knowledge into a final application. Here, it is possible to choose from two user interfaces, first, classic user interface which demonstrates possible utilization in real world and second, testing interface which demonstrates functions of each detection and filtration method used in program and their effect on detection. Application is written in C++ language in development environment of MS Visual Studio 2005 and compiled with MS VS internal compiler. Tested was under MS Windows XP and MS Windows Vista OS.
|
|
|
Positive displacement pump design
Poprac, Martin ; Sluše, Jan (referee) ; Klas, Roman (advisor)
This bachelor work is about basic types of positive displacement pumps, focused on their design, advantages and disadvantages and their applications. In the second part of the work we are focused on the possibilities of reducing noise levels of some types of positive displacement pumps. The whole work consists of many pictures and diagrams for the better understanding.
|
|
|
Knowledge of lower secondary selected school pupils about dental hygiene
Prchalová, Kateřina ; Thorovská, Alena (advisor) ; Zvírotský, Michal (referee)
The bachelor's thesis deals with the knowledge of lower secondary students of a selected school about dental hygiene. The theoretical part is focused mainly on the prevention of dental caries and dental aids. There is also described the anatomy of the oral cavity, the morphology of the teeth, the structure of the teeth, the structure of the teeth as a whole and the most common diseases caused by insufficient or incorrectly performed oral hygiene. The practical part is mediated by a questionnaire survey, which took place in the 9th grade of primary school in Havlíčkův Brod. The aim was to find out what knowledge the students have about dental hygiene, dental aids and teeth in relation to the subjects of health education and natural history. The second partial goal was to find out what is their most common source of information about dental hygiene. The results of the questionnaire survey showed that the pupils of this school have a satisfactory knowledge of dental hygiene, but the anatomical knowledge about the teeth and the problems caused by the insufficient hygiene of the oral cavity is less satisfactory. It was found that pupils most often obtain information from parents, dentists or dental hygienists. On the contrary, they get the least information from advertisements and influencers. At least...
|
|
|
Morphological variability of the incisor in mutant mice
Lochovská, Kateřina ; Hovořáková, Mária (advisor) ; Churavá, Svatava (referee)
Myš je nejfrekventovaněji používaným experimentálním modelovým organismem pro studium vývoje zubů. Myší funkční dentice obsahuje jeden řezák oddělený od tří molárů dlouhou bezzubou diastemou v každém čelistním kvadrantu. Cílem této práce bylo shrnout poznatky o myší dentici a jejím vývoji se zaměřením na myší řezáky a jejich patologie. Myší řezák je díky svým vlastnostem jedinečným zubem. Charakteristickou vlastností hlodavců jsou právě kontinuálně rostoucí řezáky. Tyto řezáky jsou pokryté sklovinou pouze na labiální straně. Lingvální povrch je tvořen pouze dentinem. Toto je spojeno s asymetrickou abrazí. Nicméně je také častým cílem mutací, ať už v podobě delece nebo jiné modifikace genů. Tyto mutace dentálních signálních drah jsou studovány na mutantních myších jako jsou například Tabby myši, Sprouty nebo Small eye (Sey) mutantní myši a mnoho dalších. Některé mutace jsou homologní k lidským onemocněním. Například X-vázaný tabby (Ta) syndrom u myší je považován za homolog hypohidrotické ektodermální dysplásie (HED) u lidí. Tato mutace napadá velikost řezáku, jeho tvar a pozici stejně jako cytodiferenciaci. Dále se může objevit hypodoncie, anodoncie nebo nějaké morfologické změny napadající ostatní existující zuby. Abnormality v počtu, velikosti a tvaru zubu byly dobře zdokumentovány v lidské...
|
|
|
The signs of odontogenesis externally to the prospective functional dentition in the experimental model
Fábik, Jaroslav ; Hovořáková, Mária (advisor) ; Buchtová, Marcela (referee)
6 Abstract The development of the mouse tooth primordium is an important model for studying odontogenesis, as well as general organogenesis. The development of the mouse lower incisor is of remarkable interest. The epithelial anlage of the mouse lower incisor is interconnected with the vestibular anlage via the epithelial bridges. According to some authors, the epithelial bridges represent an area, where the transient rudimentary incisor germ appears. From a morphological point of view, the first sign of ongoing epithelial-mesenchymal interactions during early odontogenesis is the thickening of oral epithelium. From a molecular point of view, it is the expression of the Shh, Eda, Edar, Pitx2, Bmp2, Bmp4 and Dlx2 genes. Except for the transcription domain, representing the proper signalling centre of a developing prospective incisor, a transient transcription domain, localized anteriorly and superficially, appears in the odontogenic zone of the epithelium during early development. The anterior transcription domain originates in the area of epithelial bridges, and according to some authors, from an evolutionary point of view, it corresponds with the signalling centre of the rudimentary incisor germ. The aim of this diploma thesis was to compare the temporospatial dynamics of SHH and EDA protein expression in...
|
|
|
Early tooth development of Tabby mice
Smrčková, Lucie ; Peterková, Renata (advisor) ; Černý, Robert (referee)
The developing mouse dentition is a very useful tool to study molecular regulation of odontogenesis and also organogenesis. The embryonic mouse dentition comprises developing functional tooth primordia as well as rudimentary tooth primordia. These rudiments arrest their growth during development and either degenerate or become a part of a functional tooth. Mice with gene defects also allow elucidation of a function of genes, their products and signalling pathways. The protein ectodysplasin is essential for development of ectodermal derivatives - skin, hair, glands and teeth. The Tabby mice have a mutation in the Eda gene, which encodes the protein ectodysplasin, and they display a number of dentition anomalies. Early development of the lower jaw dentition in Tabby embryos has been already morphologically described. As a prerequisite for understanding regulatory mechanisms of odontogenesis in Tabby mice, it is also necessary to map the spatiotemporal dynamics of signalling centres that express Shh in both the rudimentary and functional tooth primordia. The aim of this thesis was to compare the signalling centres based on the Shh expression and its spatiotemporal dynamics in the lower jaw of Tabby and WT mouse embryos. Then the Shh data were correlated with known morphological data to clarify the...
|
|
|
Design of a simulator module for analysis of friction and wear of teeth during cleaning
Snopek, Lukáš ; Streďanská, Alexandra (referee) ; Vrbka, Martin (advisor)
This thesis focuses on the design of a module for the tribological simulator Bruker UMT TriboLab, which will be used in research in the field of analysis of wear of hard dental tissues and filling materials due to tooth cleaning. The aim of this work was the design of experimental conditions, module construction, creation of drawing documentation, production and subsequent implementation of a validation experiment. The conditions of the experiment were determined on the basis of research and to create an optimal design solution, prototypes were continuously produced using the 3D printing method. Finally, two toothbrush fixtures and two dental filling sample fixtures were made based on the drawing documentation. Subsequent assembly of the fixtures and the implementation of the experiment on the tribometer verified their functionality, which makes it possible to declare all the goals successfully met. Now these fixtures will be part of several research tasks in the field of oral biotribology.
|
|
|
Ceramic dental restoration milling from stock based on ZrO2
Ščasnovič, Erik ; Spusta, Tomáš (referee) ; Kaštyl, Jaroslav (advisor)
In this bachelor thesis, the theoretical overview about the milling of the dental zirconia blanks was performed. The tests of biaxial flexural strength were evaluated in the experimental part, as well as the roughness and the grain size in sintered state and the linear shrinkage was determined. These tests were done for gel cast blanks from zirconia dioxide prepared in laboratories and also for two types of commercially available zirconia oxide blanks fabricated by cold isostatic pressing. The relationship between strength and grain size was shown. The samples prepared from gel cast blanks had statistically significantly higher strength than samples from commercial blanks. At the end of the thesis, the milling of dental crown was carried out based on real tooth model from gel cast zirconia blank studied in this thesis.
|
guest ::
